 |
3-D Flying
This refers to a new
style of flying and raises the hobby to a whole new dimension.
Unlike real airplanes remote control planes can have a power to
weight ratio that will allow them to perform moves that could not
be accomplished in full size planes. Not only the power to weight
comes into play but the G-forces placed on the pilot of the real
size plane. That allows us to push these RC planes to the edge in
all types of maneuvers.
These types of planes
have very large control surfaces and large throws of those
surfaces, and usually have a very light airframe.
|
 
| Sealing
Hinge Gaps You can
use either clear ultra coat or even clear packing tape to
seal the hinge gaps in most aerobatic or 3-D planes to help
prevent control surface "flutter". |
| Threading
Holes When screwing
into the wood surface of your plane, run the screw in once
remove it and put a few drops of thin CA in the hole. This
hardens the threads in the hole and helps hold the screw. |
|
