 |
Rolls
To perform a roll
start at a safe height. When you are confident apply full aileron to
the right or left and put the stick back in the middle when one
rotation has been completed. You may notice the model in a nose down
attitude. To stop this apply a little down elevator when upside down
(inverted). If flying an aerobatic model like a fun fly, pattern or
IMAC model, you will need little movement to complete the roll.
|
 
| Dings and
Dents Have you ever had a dent
in a balsa leading edge? Try fixing it with water! Get a
small diabetic syringe and put water in it. Inject a little
water into the balsa into and around the dent in the leading
edge. Heat the area with your covering iron. When the water
starts boiling, it will build pressure and push the balsa
out to its original shape. |
|
